The Polos 300 advance single substrate spin coater is perfectly suitable for a wide range of applications, including drying, rinsing, cleaning, and coating. This table top spin coater is seamless build in a full-plastic, housing in natural polypropylene (NPP) or optional PTFE, and is suitable for processing fragments as small as 5mm up to substrates sizes up to Ø300 or 8" x 8".
Includes a FREE vacuum chuck
TYPICAL APPLICATIONS FOR THE POLOS 300 SPIN COATERS:
|Available number of programs||Unlimited *|
|Steps per program||Unlimited *|
|Spin speed*||1 - 12,000 rpm** ± 1rpm steps|
|Spin speed accuracy||± 0.1 rpm **|
|Spin rotational direction||Clockwise, Counter clockwise Puddle|
|Max. acceleration||30,000 rpm/sec **|
|Programmable outputs||3 dry relays, nominal switching capacity 0.5A /125 VAC - 0.3A / 60DC|
|Housing material||Natural Polypropylene (NPP) *** or High Chemical Resistant PTFE (TFM)|
|Process chamber material||Natural Polypropylene (NPP) *** or High Chemical Resistant PTFE (TFM)|
|Interface||Detachable, full-size touchscreen, glove-friendly, IP52, chemical resistant|
|External connection||1 USB Port in the controller|
|Max. substrate diameter||360mm round or 8ʺ x 8ʺ square|
|Max. process chamber diameter||402 mm|
|Dimension (desktop version)||430 (w) x 310 (h) x 650 (d) mm|
|Shipping weight||32 kgs|
|Shipping dimension||780 (w) x 620 (h) x 580 (d) mm|
|Voltage||100 - 120 VAC / 200 - 240 VAC 50/60 Hz (auto select)|
|Power consumption||Max. 1800 W|
|Max. current||10A / 8A|
|Vacuum||- 80 kPa (-24 inchHg), ≥ 80 lpm Tube OD Ø8mm|
|Motor purge gas||20 - 50 kPa, 2-5 l/min, Tube OD Ø 6mm 500lph|
|Drain connection||1” M-NPT|
* Considering additional capability of standard unit such as USB backup, recipe cycling, PC software etc.
** Measured without substrate, limitations may apply depending on chuck used and substrate specification.
*** For our spin processors and chucks we use NPP-H with α-crystalline properties.
Customized vacuum or mechanical chucks are available for almost any application.
Chucks are available in following materials:
Note: other materials available on request, please contact us for details.
POLOS spin coaters and spin processors are specially build in Germany for SPS-Europe. Our spinners meet the highest quality standards for the Semiconductor, Biotechnology, and Nanotechnology industries. Go to SPS-Europe.
www.spincoating.com is powered by www.sps-europe.com - www.sps-polos.com